Pick by symptom, not by service name. One slow fixture means a branch-line service; two or more fixtures backing up together means the main sewer line; sewage inside the house means cleanup plus a cleared line. If the cause is not obvious, a camera inspection decides before money is spent on the wrong fix — and every price on this page is a typical range, confirmed exactly before work starts.
Find the row that looks like your house. The cause column explains what is usually happening underground in Bellevue — roots in postwar clay laterals, grease in long kitchen runs, scale in cast iron — and the service column takes you to the page that covers that job in full.
| What you see | Likely cause | Right service | Typical cost |
|---|---|---|---|
| Toilet bubbles when the tub drains; several fixtures slow at once | Blockage in the main sewer line — roots or buildup in the shared line | Main Sewer Line Cleaning | Typically $250–$500 |
| One bathroom sink drains slowly, everything else is fine | Hair and soap scale at the stopper, trap, or branch line | Sink Unclogging | Typically $150–$300 |
| Kitchen sink slow; the disposal gurgles | Grease and food waste coating a long horizontal run | Kitchen Drain Cleaning | Typically $150–$300 |
| Floor drain surfaces when the washing machine runs | A main line restriction showing at the lowest point — or a clogged floor-drain trap | Floor Drain Cleaning | Typically $150–$300 |
| Sewage smell near a floor drain or cleanout | A dry trap letting sewer gas in — or the first sign of a partial blockage | Clogged Drain Service | Confirmed before work |
| The same line clogs again every few months | The cable opened a hole, but grease, scale, or root hairs still coat the walls | Hydro Jetting | Typically $500–$700 |
| Sewage has backed up into a tub, shower, or basement | A blocked or failed main sewer line | Sewage Cleanup | Confirmed before work |
| Water stands in the yard or driveway after rain | Leaves and sediment packed into a storm drain or catch basin | Catch Basin Cleaning | Confirmed before work |
| Restaurant drains slow down during every dinner rush | Grease load in the trap and the kitchen lines behind it | Grease Trap Cleaning | Confirmed before work |
Ranges are typical for this work in the Bellevue market. Access — an outside cleanout versus pulling a fixture — and what the camera finds set the final number, and that number is confirmed before any work starts.
Every service Bellevue Rapid Drain runs in Bellevue, in one directory. Each page explains the symptom it solves, the method it uses, and the questions to ask before booking — so the service you open is the service your drain actually needs.
Sewage or water backing up now, a toilet overflowing, or several fixtures down at once. What to do in the first ten minutes, and how the visit gets scheduled by urgency.
ExploreOne drain slow or stopped — a sink, tub, shower, or toilet branch line. What you can safely try first, and the point where a cable and a camera beat another bottle of chemical cleaner.
ExploreTwo or more fixtures backing up together points to the main line. Cable or hydro jetting through the cleanout, with a camera check on older clay and concrete laterals before anyone recommends more.
ExploreWall-to-wall cleaning of the sewer line itself, not just a hole through the clog. For lines that re-clog within weeks because grease, scale, or root hairs still coat the pipe walls.
ExploreBasement, garage, and laundry floor drains that bubble, smell, or surface when the washer drains. This page separates a clogged trap from a main-line warning, because the floor drain is the lowest point in the system.
ExploreKitchen and bathroom sinks that drain slowly or not at all — grease and disposal waste in kitchen runs, hair and soap at the bathroom stopper and trap. Fixture-specific work that protects finishes and disposals.
ExploreGrease cooling in long horizontal runs, dishwasher backups, and disposal clogs. Cleaning that removes the grease film itself, not just the plug, so the sink stays open after the visit.
ExploreSlow tubs, showers, and sinks from hair and soap scale, plus the gurgling that means the restriction sits deeper than the fixture. Organized by fixture so the right branch line gets the work.
ExploreA toilet that clogs, overflows, or will not clear with a plunger — and the checks that separate a toilet problem from a main-line problem before any tools come out.
ExploreThe classic rooter visit, done with diagnosis: a cable machine and root cutters for recurring lines, with camera confirmation of what the cable actually found inside older Bellevue laterals.
ExploreHigh-pressure water that scours pipe walls clean — grease, scale, and root hairs a cable leaves behind. Camera first on clay and cast iron, so the pressure matches the condition of the pipe.
ExploreSewage inside the house: extraction, disinfection, and drying — plus clearing and camera-checking the line that caused the backup, so the cleanup is not repeated next month.
ExploreYard, patio, and driveway drains that leave water standing after Bellevue rain. Debris and sediment cleared, with a straight answer on which drains are yours and which belong to the city.
ExploreSediment, leaves, and standing water in private catch basins and collection points, cleaned out before the wet season turns a slow basin into a flooded low spot.
ExploreRestaurants, retail, offices, and multi-unit buildings — floor drains, stack lines, and grease-loaded kitchen lines, with scope and scheduling planned around operating hours and tenants.
ExploreTrap and line care for Bellevue food service, where grease buildup quietly slows the whole kitchen line. Cleaning cadence matched to your volume, so a backup does not land on a Friday night.
ExploreDrain work gets sold as one thing, but it is three. Paying for the wrong one is why clogs come back: a clearing cannot fix what only a cleaning removes, and neither should be sold before a diagnosis says what is actually in the line.
A sewer camera travels the line and shows roots, low spots where water pools, offset joints, and breaks — the causes you cannot see from the fixture. It is the first step on recurring clogs and on older clay or cast iron laterals, and it decides which of the other two jobs your line needs. See how it fits a main line visit.
A rotating cable with a cutting head opens a path through the blockage and restores flow, usually within the visit. It is fast and right for a simple clog — but it leaves the pipe walls coated, which is exactly why some drains re-clog a few months later. Start with clogged drain service when one fixture is down.
High-pressure water scours the full pipe wall — grease film, mineral scale, and the root hairs a cable trims but leaves rooted. The line drains the way it did when it was new, and it stays open longer. This is the step up when clearing alone keeps failing, covered under hydro jetting and sewer cleaning.
Bellevue Rapid Drain is based at 1633 151st Ave SE and serves homes and businesses across Bellevue. Each neighborhood page covers the local housing stock and drainage patterns — postwar laterals in Lake Hills and Crossroads, root pressure in Bridle Trails and Somerset, shared stacks in Downtown towers.
Condo towers and shared stack lines.
Central BellevueAging cast iron in 1950s and 60s homes.
Central BellevueMature trees, root-prone laterals.
Central BellevueBranch-line clogs, recurring slow drains.
Central BellevueConifer roots in clay laterals.
Growth and business districtsMixed-use buildings and grease lines.
Growth and business districtsPostwar homes at sewer-line age.
Growth and business districtsHillside lots, long lateral runs.
Growth and business districtsPostwar clay and concrete side sewers.
Growth and business districtsSloped lines above Factoria.
East and south BellevueLakeside homes and storm drains.
East and south BellevueCommercial drains, downslope lines.
East and south BellevuePostwar laterals, I-90 corridor.
East and south BellevueCedar roots, long downhill runs.
East and south BellevueOlder laterals near Coal Creek.
Lake and hillside contextHillside runoff and storm drainage.
The map provides local contact context for Bellevue Rapid Drain. It does not determine boundaries, responsibility, response time, or serviceability.
Start with the symptom. One slow fixture means the clog sits in that fixture's branch line. Two or more fixtures backing up together means the main sewer line. Water or sewage at a floor drain means the lowest point of the system is affected. Match what you see in the symptom table on this page, or call (425) 264-4094 and describe it — the right service is confirmed before any work is booked.
Clearing one fixture drain typically runs about $150–$300, a main line clearing about $250–$500, hydro jetting about $500–$700, and a camera inspection about $300–$400 when one is needed. These are typical ranges for work like this in the Bellevue market, not a quote. Access and camera findings set the final number, and it is confirmed before work starts.
Clearing opens a path through the clog with a cable machine so water flows again. Cleaning removes the buildup coating the pipe walls, usually with hydro jetting, so the clog is far less likely to return. A camera inspection shows which one your line actually needs before you pay for either.
When a clog keeps returning, when the cause cannot be seen from the fixture, when the home has older clay or cast iron lines, or before a home purchase. The camera shows roots, low spots, offsets, and breaks inside the line, so the repair money goes to the real problem.
Yes — restaurants, retail spaces, offices, and multi-unit buildings in Bellevue use the commercial drain and grease trap services for floor drains, stack lines, and grease-loaded kitchen lines. When you call, share the property type and your operating hours, and the scope is planned around them.
Call with what the drain is doing — which fixture, since when, and whether it has happened before — and the right service gets confirmed before anything is booked.
Call (425) 264-4094 Start a request